There is probably a reasonable percentage of the Tindie blog readership who appreciate the glow of a Nixie tube. However lovely they are it’s fair to say they can be a little tricky to work with on the average modern and mostly digital home workbench. This Plexiglass Digit module circumvents the challenges of delivering the classic Nixie look with modern addressable LEDs.
Supplied assembled, these excellent modules are essentially a stack of layered Plexiglas with each layer laser-etched with a number. The base of the unit contains an array of WS2812 addressable LEDs all connected to the 3-pin header connector. With a little power and your choice of a microprocessor, you can address LEDs directly under certain Plexiglas panels to light the laser-engraved number. A big advantage is not having to work with the high voltage required to drive real Nixie tubes, which can be both a hassle to get working and also a safety issue, especially if you are working with younger makers.
The beauty of this approach is the light doesn’t bleed to other layers, and you get a clean crisp number. They do have a slightly different look than traditional Nixies – the digits almost look like miniature micro-LEDs floating in mid-air. Of course, this means you can include these modules in all manner of projects to get a heavily tuneable Nixie-like display. Set in a 3D printed case clamped with threaded studs which are terminated at the top with round-headed hex nuts, these modules scream out for a steampunk-style clock, or the display for your next time machine build!
source https://blog.tindie.com/2024/11/plexiglas-digits-mimic-nixies-beautifully/
No comments:
Post a Comment